Author Archives: Author

How to Choose a Flat Roof Coating Material

flat roof with vents and asphalt coating

What is the best way to protect a flat roof?

Winter is just around the corner for all of America, and areas like Ohio can be super cold with lots of ice and snow. That’s why for commercial and industrial structures that have large buildings with big, expansive flat roofs it is time to prepare for that ice and snow with the best flat roof coating possible. 

While a flat roof provides your commercial structure a certain aesthetic appeal and gives it a boost in energy efficiency, it needs routine maintenance and upkeep. Without the following steps being followed, you’re putting your flat roof and structure in jeopardy of large and expensive issues later: 

  • Gutters: Inspect and Clean Regularly

A flat roof system should have a minimum of one drain – more is better. Debris that gets windswept onto rooftops will block the drain, causing pooling and ponding, and leading to roof leaks. Annually, have the flat roof cleared of any branches, leaves, twigs, and other debris, clearing the drain(s) of blockage.

  • Waterproofing: Coating and Sealing

Every flat roof should have the best flat roof coating, especially if it tends to drain poorly. Choose a waterproof sealant that will protect your roof from damage that can cause leaks. Having the best flat roof coating installed by a professional gives you the best results and a guarantee it will perform well. 

  • Standing: Don’t Stand on the Roof

Just because you have a flat roof doesn’t mean it is meant for standing and walking. This should only be done when absolutely necessary and by contractors that are equipped and trained to stand, walk, and work on a flat roof. 

  • Inspections: Schedule Regularly

Regular flat roof inspections are important. They allow a contractor to find small issues that can become big, expensive problems later.  It is recommended to have a roof inspection once at the start of summer and once at the end of winter.

  • Cracking: Take Care Immediately

It is inevitable that every flat roof will experience cracking, even with the best flat roof coating installed. These cracks and fissures should be repaired immediately. These are usually found around the raised ridges where water exposure can do the most damage the quickest. 

  • Foliage: Keep It Pruned

If your commercial building is positioned where trees and other foliage are close, this will increase the amount of debris falling on it from birds, critters, and wind. Keep surrounding trees cut and trimmed back to minimize this from happening. 

What is the best flat roof coating?

One of the most popular and most recommended Flat Roof Coating Options is SPF (Spray Polyurethane Foam). This eco-friendly option is considered one of the best flat roof coating options for commercial, industrial, and manufacturing structures. SPF is a liquid that is sprayed on and that expands into foam. The end result is a solid layer of damage and leak protection.         

How often should you coat a flat roof?

For a flat commercial structure roof with an asphalt/coal built-up layering, recoating every two years is recommended. With a roof that has been properly installed and maintained, by using a roofing contractor that knows how to apply a flat roof coating correctly, you can extend the lifespan of your roof by 10 years or more.

How much does it cost to coat a flat roof?

A quality flat roof coating will cost up to $2.00 per square foot for materials with the additional cost of the layer around $3.00 per square foot. At $5.00 per square foot, you are protecting your commercial flat roof from possible extensive damage, prolonging its lifespan, and saving on your energy bills. 

How do you stop a flat roof from leaking?

A leaking flat roof is not anything a commercial building owner wants. With routine and thorough roof inspections, this can often be prevented. Working with a commercial roofing contractor who can teach your maintenance team how to prevent ponding on flat roofs can be important, as that is known to lead to a leaking roof. They will also make any repairs needed to prevent water and moisture build-up that causes damage and hazards like flooding, mildew, mold, and rotting, including installing the best flat roof coating.

Some ways of preventing flat roof leaks include:

  • Roof Flashing – Making sure your flat roof has flashing installed around any roof protrusions like chimneys, skylights, vents, and around edges will minimize the places roof leaks can start. 
  • Roofing Membrane – A rubber roofing membrane is one of the best flat roof coating ways to prolong the lifespan and minimize possible leaks. 
worker installing flat roof coating

On Top of It All 

If a roofing contractor suggests another roof coating other than acrylic, you want to make sure you’re getting the best flat roof coating possible. You also want to know what materials you’re using for other issues when taking care of your roof. When it comes to repairs, is silicone roof repair good for a flat commercial roof? In most cases, yes. Silicone can restore almost any existing roofing membrane system. The roofing contractor can apply a layer of roofing silicone across the entire roof. This will eliminate leaks and form a membrane that is waterproof. If you’ve got any more questions about flat roof coatings, reach out to us by calling (740) 505-1467.

Which metal roof is right for you?

Worker installing a brown metal roof.

Choosing a Metal Roof for Your Building

Here in Ohio, we have cold and windy days a good part of the year. We also have our share of hot UV sun rays and we’ve been known to have some high winds and hail storms, too. So, with that in mind, a commercial structure that needs an expansive roof system also needs one that is durable and weather resistant, no matter the weather. Like a metal roof installation

Types of Metal Roofs

Once you’ve seen one style of commercial metal roofing, you’ve seen them all, right? Wrong! Not all metal roof installations are alike because there are different types of metal. So what are the different types of metal roofs? There is a trifecta of sorts to keep in mind when purchasing new commercial roofing:

  • Durability
  • Energy efficiency
  • Cost

There are many things to think about with a metal roof installation, as it must be properly installed and properly maintained to give it the longest lifespan possible. Of course, the climate and sub-roof conditions of a commercial structure can lessen or lengthen that lifespan as well.

Energy efficiency is a buzzword today, and probably has been for the past decade or more, and there is good reason for that. With the federal government, cities, and states adding energy efficiency parameters to commercial structures, it is now a necessity to get the best metal roof installation possible. 

Durable metal roof installation can have up to a 60-year lifespan or more depending on which of the metal roofing systems on the market you choose. The materials used for commercial metal roof installation most often include:

  • Aluminum
  • Aluminum, zinc, and tin
  • Coated or stainless steel
  • Copper
  • Corrugated galvanized steel
  • Tile sheets

There are numerous benefits no matter the material you choose. Metal roofing sheets typically come with an attractive, finished appearance while also being fire-resistant, strong, and sustainable. With an added layer of protection to coat a metal roof on installation, corrosion from exposure to the environment, moisture, and pollution becomes almost non-existent. 

Why metal roofing? 

Metal roof installation has become popular for many Ohio commercial building owners for several reasons, but the top three are:

  • Easy Installation

Metal roof installation is easy in most cases. Can metal roofing go over old material? Yes, if the existing roofing material and structure is in good condition and local building codes permit it. Roofing metal is lightweight, so installation is easier and faster, meaning less disturbance for your business and less labor needed. This all equals fewer expenses, as well. 

  • Less Expensive

There is no argument that the roofing of a commercial structure is expensive. However, a metal roof installation will give you many years without the need to replace your roof.  As a premium material, a metal roof installation will cost more initially, but the durability will save you money with a lifespan of 40 to 60 years or longer, given proper maintenance. With the energy saving factor that reflective metal has to keep the UV rays out, you can also lower your energy costs. 

  • Durability 

Let’s speak a little more about that durability. No matter the weather from hailstorms to high winds, heavy rains, ice, snow, and more, a metal roof installation will keep your building, employees, customer, and contents safe. 

How energy efficient is a metal roof?

Cooling and heating a large commercial building can be draining on the budget. So, when the time comes for new roofing, consider a metal roof installation for the best energy efficiency possible. 

A metal roof installation will provide you a tremendous energy-saving roof that is exceptionally insulated and the cooling is above all the best because these roofs reflect the sun. This will keep the building as a whole cooler, especially the top floors. Worried about keeping it warmer in the winter? With a dark color, the metal roof installation absorbs the heat. 

Which metal roofing is best: aluminum roofing or steel roofing? 

Steel is naturally stronger, less expensive, and more fire-resistant than aluminum metal roofing. Do note that aluminum does not receive a Class A fire rating, but with the right sheathing and underlayment, it can be brought up to Class A fire rating. 

Green metal roof on a white building.

In Closing

Additional pros to choosing a metal roof installation are the environmental benefits. A metal roof will be 100% recyclable when it has finished serving your building. Before it got to your building, most of it was made from recycled materials rather than chemicals or the crude oil that other commercial roofing materials are often made from. 

With more and more frequency, commercial building owners are turning to a metal roof installation every year. Why? Because of the many benefits we’ve discussed in this article like durability, energy efficiency, longevity, and bottom dollar. 

The different colors, styles, and textures that a metal roof installation is available in today ensure this roofing can be made to fit any architectural style of building, and those around it too. Is it any wonder metal roof installation has become popular in the residential market as well? 

For both commercial and residential metal roof installation, the added bonus is that most insurance companies offer a discount! That’s even more money saved. To learn more about metal roof installation in Cincinnati, OH, reach out to Paramount Commercial Roofing Systems at (740) 505-1467.

What is a Single Ply Roofing System?

flat roof

What is EPDM roofing?

In Ohio, the winters can be brutal, and the summers can get blistering hot. Businesses do as much as they can to make their structures energy efficient, typically starting with the single ply roofing. Since there are several different single ply roofing types, which one is the best is always the first question: EPDM, PVC, or TPO. 

Ethylene Propylene Diene Terpolymer, referred to as EPDM, is an exceptionally durable membrane made from synthetic rubber. This roofing membrane has been popular to use on low-slope roof buildings for decades. 

There are two key ingredients in EPDM roofing membrane, both are oil and natural gas based, ethylene and propylene. EPDM roofing is either black and white, and sold in either 45 mils or 60 mils thickness, off of rolls in various widths. It is installed by single ply roofing contractors and attached to the sub roofing by one of the following three methods: 

  • Fully adhered – using a specialized roofing glued to the insulation.
  • Mechanically attached – fastened with screws through the insulation boards, into the metal deck below.
  • Ballasted – loose-laid, fastened in sporadic areas then topped with gravel.

What is single ply TPO roofing?

Thermoplastic polyolefin, commonly referred to as TPO single-ply roofing. Because of the advantages it offers for installation, roofing contractors love it.  TPO is flexible and pliable, making it easy to work with to adhered to ethe roofing, even in cold weather. Customers love it for the durability and performance it offers by meeting their biggest demands with six key features: 

  • Heat-reflective
  • Energy efficient roofing
  • UV resistant
  • Ozone resistant
  • Chemical resistant
  • Environmentally friendly

What is the difference between TPO and PVC roofing?

PVC and TPO are both a quality single ply roofing membrane, both are used on flat and low sloped roofs. Both are installed with heat welded seams and both are considered a ‘cool’ roofing choice. 

TPO single ply roofing was designed with the intention of combing and improving EPDM single ply roofing rubber membrane and PVC single ply roofing rubber membrane, without any of the disadvantages of both. 

So while TPO single ply roofing has many of the similarities of PVC single ply roofing there are two big differences: 

  • TPO has a 20 year history that includes formula updates, material failures, and recalls. 
  • PVC has a had solid reputation for over 30 years.

Those are two major differences, but they have more similarities that can make it hard for a client to decide which is best for their structure. Both offer the following: 

  • Both are a thermoplastic material.
  • Both are heat weldable membranes.
  • Leak resistant. 
  • Both have few seam failures.
  • Both are considered to be eco-friendly, green roofing material.
  • Energy efficient.
  • UV ray resistant. 
  • Both are installed in similar process with similar skills and tools.
  • Both can be installed fully adhered or mechanically fastened.
  • Both are chemical, grease, and oil resistant.
  • Both are flexible and easy to conform to various roof movements.

Is TPO better than EPDM?

Okay, so we know what is bad/good/different/same about PVC single ply roofing versus TPO single ply roofing.  What can TPO do that EPDM can’t in addition to taking over 50% of the single-ply roofing market?  Let’s take a look:

  • ENERGY EFFICIENCY: In Ohio, as anywhere in the country, commercial buildings may be heated by electric or gas and cooled by electricity. TPO single ply roofing will help cut back energy costs by reflecting the hot sun UV rays in the summer but absorbing the warmth in the winter. 
  • PUNCTURE RESISTANCE: When single ply roofing gets punctured, it often leads to leaking. TPO is three times more puncture resistant than EPDM.  
  • INSTALLATION CONVENIENT: TPO single ply roofing membrane is versatile membrane that can be installed fully adhered or mechanically attached, which means it can be installed in cold temperatures. 
  • DIMENSIONAL STABILITY: TPO single ply roofing offer dimensional stability, less likely to shrink like EPDM. 
  • SEAM STRENGTH: TPO single ply roofing has welded seams, making them stronger than EPDM seams. 

What are the single ply roofing pros and cons to concerned about? 

With the economy of today, a property owner and property manager need to make the right decision when choosing the roofing material for their building. They should review the differences between single ply roofing vs built up  and if single ply roofing is their choice, know the pros and cons can help determine which is better, EPDM, PVC or TPO single ply roofing. 


  • Proven Track Record: EPDM single ply roofing has been around for more than  60 years, PVC for more than 30, and TPO for 20 years. 
  • Insulation Materials: Single-ply roofing membranes do not include insulation, which gives you options in choosing your preferred insulation material. Choose from Polyisocyanurate, Expanded Polystyrene, or Extruded Polystyrene. 
  • Reflective or Retentive: TPO, the white roof, is quickly gaining popularity for commercial single ply roofing because it reflects the hot UV rays. EPDM is the black roofing which has a history for being a high-performance material for heat retention.  
  • Easy Installation: TPO Installation has relatively simple installation process that can be attached with 3 different methods, one need a hot-air gun to melt the membrane seams. EPDM uses a seam tape to join the seams. 
  • Flexible and Lightweight: Because single ply roofing comes in multiple layers, the thickness can be chosen for budget purpose. It also makes the roofing material easier to install because it is lighter weight.


  • Easily Punctured: The thin single ply roofing material can be easily punctured, leading to leaking roof. 
  • Roofing Accessories: A commercial roof typically has accessories like the A/C unit, air vents, skylights, plumbing vents and more that can make rolling out single ply roofing material difficult. 
  • Vulnerable to Leaks: Because single ply roofing has seams, they are vulnerable to leaking. 
  • UV Rays: The adhesive used to install single ply roofing membrane is degraded quickly from UV rays. 
flat roof

How much does single ply roofing cost?

There are a couple of important factors that will determine the cost of a single ply roofing. One is the size of the roof and the other is the condition of the existing roof.  Rough estimates for single ply roofing based on a 20,000 square foot commercial roof can cost as little as 3.50 per SF and as much as $7.50 per SF, for materials and labor. If the exiting roofing and deck needs to be replaced, those prices can increase up to as much as $14 per SF. Need single ply roofing in Cincinnati, OH? Call (740) 505-1467 today.

How do you repair a built up roof?

flat roofing system in need of repair

How do you install a built up roof?

Before we discuss repairing a built up roof, let’s clarify what does built up roof mean? A built up roof consists of layers called asphalt or tar that are alternated with reinforced fabrics for support. It is installed directly on the roof in as many layers as the building owner chooses or is recommended by the roofing contractor. Once all the layers are installed, a layer of gravel or stone is installed on top. 

A built-up roof is one of the oldest roofing processes still used today. A built up roof is water repellant and leak resistant. It is a durable roof material with a long life span on a commercial structure when maintained and kept up. The basic steps to install a built up roof are: 

  • First: Base sheets are attached to the subsystem with roofing nails.
  • Second:  Adhesive, asphalt, concrete, or tar are applied over the base sheet and alternated to the desired thickness. 
  • Third: Then a final layer of built up roof with gravel is applied. 

How much does built up roofing weight?

A built-up roof typically includes several materials that account for the weight. There is the built-up membrane, insulation, and then the final layer of gravel if the owner chooses.  The thickness of the layers can vary the weight and the thickness of the insulation can affect the weight as well.  

For an existing roof’s weight estimate, it is recommended to do a field verification because of these factors that can alter the weight of built up roof. In addition, when estimating a built up roof weight, the weight of all materials used to build the roof supporting structure should be included. This is the roof rafters and trusses in addition to the built up roof system. 

  • 4-ply Built up Roof with Gravel Surface: Weight (lbs.) per Square Foot 6.3
  • 4-ply Built up Roof with Smooth Surface Weight (lbs.) per Square Foot 2.58
flat black roof

What is the difference between built up roofing and modified bitumen?

Flat roofing is common for commercial and industrial structure. This is where the HVAC system is installed along with electrical and plumbing.  There are several option for roofing materials on a flat roof, with built up roofing and modified bitumen being the most popular. Where they are alike is the reinforcement, surfacing, and weatherproofing layers.  Where they differ is explained as follows: 

Built-up Roof System

Built-up roof system, or BUR system have been used over a century in America. The name is derived from the way it is installed: Layer after layer after layer, typically 4 layers, of asphalt and reinforced fabric or tar and reinforced fabric, then a layer of gravel is the final layer. 

Modified Bitumen Roof System

This is an alternative to the built up roof system that is layers as well but with asphalt and rubber polymers instead of asphalt and reinforced materials. This built up roof construction of different layering materials give the roof more UV resistance, more flexible which makes it more durable. 

So what are the built up roof pros and cons that makes it still a popular roofing material? Built up roof systems are installed by way of ballasted or tar & gravel, which means the size of the rocks is what determines how it is installed.  The pros of a built up roof system are: 

  • Traction: A built-up roof system has good year round traction, a bonus for areas where the ice and snow is frequent for longer periods of time. 
  • Completely Sealed: The tar & gravel layer is another advantage that a built up roof system has over other flat roofing materials.  Built-up roofing and waterproofing are a team because it is a completely sealed roofing material which means less likely to leak like EPDM, PVC, or TPO roofing materials. 
  • Lifespan: Built up roof systems have an average lifespan up to 30 years.  
  • Impact Resistant: a built up roof system is impact resistant, making it an excellent choice in areas where the weather can bring hailstorms, high winds with falling branches, and more.  
  • Not Weather Dependent: Because built up roof system is a cold application installation; the weather situation doesn’t delay installation. 
  • UV resistant: Built up roof systems are UV resistant with the rock layer acting as a natural barrier. 
  • Fire Resistant: A built up roof is resistant to falling ash, sparks, and fire, because the rock layer protects the membrane and structure. 
  • Low Maintenance: A built up roof has little maintenance required. 
  • Easy Repairs: A built up roof is easy to repair with cutting out the affected membrane layers and add new bitumen and gravel layers. 

Built up roof system isn’t the cheapest way for roofing installation compared to other roofing options. However, it is a more durable, longer lasting roof material, which will pay for itself in longevity. For your built up roofing repair needs, call (740) 505-1467 today.

Can you coat a metal roof?

metal sheet roofing

How do you restore a metal roof?

Metal roof coating for commercial and industrial buildings has been used for years, yet there are still questions about the pros and cons of metal roof coating. Like, “Does roof coating stop leaks?”, which the answer is: Yes.  A metal roof coating is a seamless roofing that is applied in liquid from and is designed to renew existing roof systems that are aged, weathered, and have developed small leaks. The elastic properties of this liquid ember allow existing roof to stretch without further damage, returning to their original shape.

May you just bought building with metal roofing that needs repairs, or you own building with a metal roof that is at the end-of-life and needs help. Either case, right now isn’t a good time to have a new metal roof installed, so you’re considering a metal roof coating. Before you spend that money, you’re wondering if that will that suffice? 

Metal roof coating is an excellent way to restore your roof cost-efficiently with two factors: Choose a reputable contractor and choose the right product for your roof. Both metal roof coating restoration process will save you money now and is eco-friendly too. 

  1. Stopping Leaks. The first step in this project is to replace any roofing panels that are compromised, then refasten loose panels and parts. Next any holes or loose seams need to be patched with an acrylic mastic metal roofing base coat or thick-bodied sealant.  
  2. Prepare the Surface. Clean the roof surface thoroughly and apply a rust inhibiting product if the existing roof has roof.  This can also be applied after you have completed the metal roof coating.
  3. Apply Metal Roof Coating. You should look for metal roof coating that offers rebates for being a green building upgrade.

How do you seal coat a metal roof?

Using an elastomeric rubber coating for a metal roof coating will provide flexibility and resistance against harsh weather. There are different metal roof coating products for every type of metal: Aluminum, Corrugated, Standing Seam, Tin, and more, even rusty metal. The process is the same in general, each brand of metal roof coating products will have specific instructions: 

  • Surface Preparation: If possible, pressure wash with clear water and allow to completely dry. Make any repairs needed and check the drainage system. Apply adhesive seam tape as needed around and on deteriorated fasteners, joints, rubber washers, seams, and around roof penetrations like vents. 
  • Applying Coating: After you have cleaned, patched, repaired, and taped, using a heavy duty paint brush, apply the metal roof coating, allow to thoroughly dry, then apply a second coating. 
roof coating

What is the best coating for metal roof?

A variety of metal roofs can benefit from an elastomeric metal roof coating and sealer to protect and seal the existing and underlying roofing material. Not only to stop any present leaking, but prevent more leaks, and limit the weathering that is normal. Metal roof coatings are designed to move with the roof  instead of being rigid and stiff. 

Some metal roof coatings are designed to keep a structure cool while others are designed to keep a structure warm.  While metal roof coating isn’t as expensive as a new roof, it is an expense with long-term implications. Ask your roofing contractor about the various type of metal roof coating products they use and recommend for your particular situation. The real physical properties you have should be considered in addition to the metal roof coating  manufacturer’s claims to get the maximum benefits. 

Among the various metal roof coatings you can choose, the following should be considered, taking into consideration your roof’s age, roof type, typical weather conditions, and environmental concerns. 

  • Acrylic: A durable and inexpensive elastomeric metal roof coatings that is comprised of high solids emulsion polymers with potent biocides, making a high-reflective coating that is ideal for extreme UV climates. The biocides give the resistance to dirt accumulation that creates mildew. Ponding water is a weakness for acrylic metal roof coatings, so making sure the roof has proper working drainage is a must. 
  • Asphalt Emulsion: Asphalt emulsion contains of asphalt particles distributed in water with clay for the bonding element.  Available in black or brown, this durable metal roof coating contains inorganic and organic compounds, with fillers. An easy and inexpensive material to use, ideal for leveling any “alligatoring” issues or other irregularities that are common BUR or modified bitumen metal roofs. 
  • Silicone: When ponding resistance and UV protection are the focus for a metal roof coating, this is the recommended material. Slow to erode without betting brittle or hard.  Silicone formulations contain more than 90% high-solid requiring less product needed for good coverage. Because dirt is attracted to this material, it required periodic cleaning to maintain its reflectivity.  
  • Urethane: Known for being the best adhesive, durability, and strength, with an impact-resistance that is above other metal roof coatings that is foot-traffic strong. Naturally contracts and expands with the temperature and building movements. 

So, do roof sealers work? The metal roof coating and sealants can provide a protective seal that keeps moisture out wile reflecting the sun’s UV rays. Applying metal roof coating to stop leaks is one of the best ways to repair any minor roof leak, keeping expensive and serious damage away. Call (740) 505-1467 today for roof coating in Cincinnati, OH.

Do Cool Roofs work?

cool roofing system

Cool roofing for your commercial property

The summers aren’t that bad here in Ohio, but they do get warm, probably warmer than most people realize. Warm enough that a cool roof is of interest to many commercial building owners.  Commercial roofing contractors are getting more and more calls for cool roofing from commercial building owners because of the rise in utility costs and concerns for the environment.

A commercial building owner that isn’t familiar with the term ‘cool roof’ will call a roofing contractor and ask them, “How can I reduce my roof heat in summer?”, and that is the question that opens the conversation. Of course that conversation creates more questions, which is what we are going to answer here and provide information that can help you decide whether a cool roof is what your building needs.

So, to answer that question, “How can I reduce my roof heat in summer”, obviously, we’re going to tell you about a cool roof. A commercial building owner or occupant believe there isn’t anything that can be done about increasing temperatures affecting the inside of their building. They resort to turning the thermostat down, which works the HVAC system harder, which increases the utilities and wears the HVAC system down faster.

What they usually don’t realize is that the roof of the building has a large effect on the temperature inside the building because it is absorbing heat from the sun instead of reflecting. Here are some basic roofing factors that most building owners do not realize:

  • A roof’s color will either absorb heat or reflect heat.  Dark colors absorb and light colors reflect.
  • Insulation is another key factor of a roof’s temperature. Insulation is a barrier that keeps the cool in instead of it leaking out through the roof.
  • The pitch of a roof has an impact on how cool a building stays. A flat or low sloped roof absorbs heat because it is getting directly hit by the UV rays of the sun.

So, Is a dark or light roof better? 

It can depend on the climate where your commercial structure is located and roof line of the building.  When looking at the various options available for a commercial structure, think what the climate is like most of the year.  Here in Ohio, are winters are colder than our summers are hot, but that doesn’t mean our utility bills don’t increase during the summer. So, next you want to consider the surrounding area of your building. Are there a lot of trees or are you surrounded by other buildings? The sun’s UV rays heat generated by that will bounce from taller buildings around you and heat up your roof.  

The rule of thumb to remember is a dark colored roof will absorb heat and make the air conditioning work harder, which will increase your electric billing. A light colored roof is going to reflect the heat, something that commercial structures and residential properties in warmer climates choose, and where the cool roof option is gain popularity.

What is the coolest roofing material?

For a commercial structure needing a cool roof, there are a variety of cool roofing materials on the market. However, you can’t choose a cool roof material like you do the breakroom coffee machine.

This requires asking questions and doing ample research, then ask more questions as you become more informed on cool roof materials for your commercial building. Things you need to research:

  • Lifespan
  • Maintenance
  • Cost

For many commercial cool roof projects, PVC roofing material is a preferred choice for a flat roof. Although it cost more to have installed compared to other single-ply roofing materials, the benefits offered outweigh that expense overtime. Among those benefits are:

  • Crack resistant
  • Impact resistant
  • Low maintenance
  • Long lifespan (up to 20 years with proper maintenance)
  • Reflective

What color roof is most energy efficient?

When choosing a commercial roofing material, you want a cool roofing coating that offers the most energy efficiency. Just as we are advised to wear white when out in the heat, the same logic applies to the material you have your commercial structure’s roof. Cool roofing is more important in some areas than here in Ohio, but again, your building may be situated where cool roof is something you’re considering.

However, when it comes to creating a cool roof, color is secondary of what is important. Good insulation and adequate ventilation will make all the difference in the temperature inside your building and how much your energy bills are costing. That is fact all year long too, not just in the summer or winter.

flat roofing being installed

What roofing material lasts the longest?

There are new products coming out on the market every year for commercial structures and cool roof choices. From impact resistant roofing systems to coating and polymers that create that cool roof effect, they are more durable today with a longer lifespan. Which one has the longest life span for your commercial structure? Here is a breakdown of roofing materials and their expect life:

  • Metal or Steel: 50 years or longer
  • Foam: 25 years or longer
  • BUR: 30 years or longer

However, no matter which material you choose for your commercial building’s cool roof system, the key to a long life for any roof is proper maintenance. With a good maintenance program and regular inspections, the cost of replacing your roof can be avoided longer.

Are there any cool roofing issues to be aware of before making that investment? For northern states like Ohio, yes, there is cool roof issue to consider.  A cool roofs will contribute to your energy savings – if you’re in a southern warm climate. It will allow you to raise the thermostat and reduce your air-conditioning costs during the summer.

However, in states like Ohio, we spend more money trying to stay warm in the winter. So, a cool roof may not be the best answer for your building.  Visit with several reputable commercial roofing contractors about having a cool roof installed. Then do your research. Get started today by calling (740) 505-1467.

What is a Roof Restoration?

commercial roof restoration

What is a Roof Restoration?

A commercial roof restoration could revitalize your existing roof and increase its integrity for years to come. However, the question remains as to what exactly is a roof restoration? For that answer, let’s turn to a broad definition. Roof restorations describe transforming an old or damaged roof into a revitalized version of itself. As a professional roofing company can attest, roof restorations are an affordable way to clean, repair, and recoat a roof so that it will be durable for years to come.

How Long Does it Take to Replace a Commercial Roof?

Are you wondering how long it will take for your commercial roof to be replaced? If so, you’re asking the right questions. According to a leading roofing company website, it can take anywhere between two to three weeks. This is because details like vents, pipes, and skylights will add time to the procedures. It’s also essential to note that if there are any inclement weather conditions such as rainstorms, frost, snow, or serious weather events like a tornado or hurricane, that that will also prolong the deadline.

What is a Commercial Roofer?

If you are not already familiar with what a commercial roofer is, it is realistic for you to have a ready definition. A commercial roofer is able to incorporate skilled roofing services that fix or install smokestacks, external piping, airflow systems, and much more. A commercial roofer will be well-versed in many different types of single-ply roofing solutions and be able to converse with their customers about different roof types with energy, passion, and knowledge. 

How Long Does a Roof Restoration Take?

If you are vacillating between roof restoration and a roof replacement, one of the important considerations to factor in is the length of time that either choice will take. Furthermore, the amount of time that it will take for a roof restoration is different depending on which type of roofing material is selected. Restoring a flat roof could take around three days while restoring a steel roof could take longer. In order to get a specific estimate, please be sure to consult with your local, professional roofing company.

What Are the Different Types of Commercial Roofs?

If you own or operate a commercial property, the maintenance of your commercial property will naturally be a priority. In order for you to be well-informed, you should review the following list to discover more.

  • Built-Up Roofing (also known by the acronym, BUR)
  • Metal Roofing
  • EPDM Roofing
  • Green Roof Systems
  • Thermoplastic Roof Membrane (also known as TPO)
  • PVC Roofs
  • Cool Roofing

To discover more commercial roof options in your area, please do not hesitate to contact your local roofing contractor.

Commercial Roof Restoration

There may be many different roofing companies that offer commercial roof restoration, but which one should you choose? The answer is nuanced. To begin with, search out all of the roofing companies in your area by using your smartphone or computer and some relevant search terms. For example, “commercial roof restoration near me”, is an excellent way to maneuver forward.

Commercial Roof Repair

When you have a commercial property, there’s a lot to keep track of. The windows, the flooring, and the roof are all essential for the operations of your property. Moreover, your real estate value will reflect how much maintenance and upkeep you supply for your property. If you don’t already have a list of reliable companies to use for such services, now would be a good time to compile a list. Especially for commercial roof repair, it’s important for individuals to use a professional roofing company since such individuals are insured.

Commercial Flat Roof Restoration

If your commercial property has a flat roof, you are in good company. Many commercial properties have flat roofs, which is why it’s important to have a roofing company that has many years of experience in repairing and restoring such roofs. Whether you have a modified bitumen roof or a spray polyurethane foam-based system, it’s essential to have experts that you can trust. Many business owners select a spray polyurethane foam based roof because it can be effective at protecting your commercial flat roof from extreme temperatures and moisture. Whatever roofing type you settle on, ask for your roofing project manager for as much information as possible.

Commercial Roof Maintenance

Are you wondering what commercial roof maintenance includes? To begin with, the process starts with a reliable, respectable roofing contractor. Your roofing inspection will start with a visual observance of all signs of roof failure. Those roof system failures will be noted. Next, the roof will be cleaned. After that, the roof will be repaired and possibly recoated. To understand more, please don’t hesitate to reach out to your local professional roofing company.

If you are interested in a commercial roof restoration in Cincinnati, OH, please reach out to us at (740) 505-1467 to speak with a friendly member of our team.

Why choose shingle roofing?

architectural shingles

Shingle roof installation

Shingle roofing is the most popular and used roofing material for residential properties and for one main reason: It is affordable. It also provides the protection a home needs, and the choices in colors and styles have grown over the years. Still shingle roof is the choice most homeowner’s stay with because, at the end of the day though, its popularity is based on price. 

Now that isn’t to say that shingle roof construction doesn’t have different levels of quality, because there are some better than others, and not by manufacturer necessarily. Each manufacturer will offer different qualities of shingle roofing materials, trying to capture as much of the market as they can, as any product manufacturer. 

How long do asphalt roofing shingles last?

When it comes to protecting your home, the roof is an important component. It is in the elements 24/7/365 and needs to hold up under the worst weather. Including intense UV rays, hailstorms, high winds, hailstorms, and more, shingle roofing materials included.  

The roofing needs to be wear-and-tear resistant all year long for years to come, because it isn’t economically feasible for most homeowners (or their insurance company) replace the roof every year. It is for this reason that you should get the best quality shingle roofing material your budget allows. Consider the shingle roofing material you choose to be an investment in your investment. 

 With asphalt shingle roofing, while it is the most popular roofing material, it also has the shortest lifespan, no matter the brand or quality. An average lifespan for asphalt shingle roofing is 15 to 20 years. Still, as we stated earlier, remain to be the most popular choice  because they are the least expensive but provide enough protection to get the job done. 

 There are two different types of asphalt shingle roofing: fiberglass and organic.  Fiberglass has been around longer and is what you’ll find on most homes still today. Fiberglass shingle roofing is made from glass fiber reinforcing mat that is covered with asphalt to make them waterproof. The 

organic shingle roofing material is made from recycled paper and then covered with asphalt for waterproofing purpose. Upside to the fiberglass shingle roofing, it is fireproof, and the organic is not. Both wear down quickly in hot weather with constant UV rays beating on them every day. The become brittle and begin to crack, and aesthetically, downgrade, looking old and worn. 

What are the longest lasting roof shingles?

If you are looking for a roofing material that will give you longer than 15 to 20 years, look at clay, concrete, or slate tiles. All three of these roofing materials will outperform wood shake or other natural roofing material significantly, including  asphalt shingle roofing or metal roofing. However, they are not as durable as metal roofing in a hailstorm. 

What is the most popular roof shingle color?

The most popular colors of asphalt shingle roofing is black, browns, or gray with red in some areas being a popular choice.  Roofing material will add to the overall aesthetics and appeal of your property, so matching a color that goes with the general architectural style and coloring is important. However, it doesn’t have to be a perfect match to look good, sometimes going with a color that is opposite of the homes overall color can give it a different look and make it stand out without being cast as odd. 

What color roof is most energy efficient?

Darker shingle roofing will absorb more light and UV rays, putting out more heat. For a home in a colder climate, that can keep the snow buildup to a minimum, but in the heat of the summer, darker shingle roofing can be detrimental to the utilities bills and the HVAC system. 

Should new roof shingles lay flat?

When asphalt shingle roofing is new, it is common for them to appear bumpy. However, as they heat up and become flexible, the adhesive bond will soften, and they will begin laying flat permanently.  Consider this a break-in period.  If the new roofing is installed on an existing shingle roofing, it may never lay completely flat. This is why roofing contractors encourage customer to have the existing roof removed instead of trying to save money.

It is important to make sure there is a drip edge installed on any new shingle roofing. This piece of metal flashing along the roof edges controls water flowing away from the fascia as a way to protect the components under the asphalt shingle roofing. lying roofing components. Shingle roof without drip edge, the water would work its way under the shingles and destroy the underlying components, working its way into the walls. 

shingle roofing brown tiles

What are Shingle Roof Benefits?

  • Easier than other roofing materials to install which keeps the cost down for the homeowner
  • Affordable, durable, sturdy, and versatile
  • Lightweight, another reason easy to install
  • Low maintenance
  • Easily to install on steep-sloped roofing
  • Class A fire protection rated
  • Almost endless in colors, with various styles and textures

Roofing is important to your home, choosing the best of roofing material you can afford will pay off in the end by not having to replace it too soon. Call (740) 505-1467 today for your shingle installation in Cincinnati, OH.

Does Cool Roofing Actually Work?

white roof installation

What is cool roofing and why is cool roofing a good option? 

How was 2020 for you and your company? Whether you were the owner of a business or manage the building that houses a business, this year has been a doozy. As the owner or manager of a business structure, every year could be a doozy when it comes to maintenance and utilities, which brings us to the topic of cool roofing

Cool roofing is a roofing system that has a high solar reflectance of the sun’s UV rays and wavelengths and reduces heat transfer into the building. It has a higher thermal emittance that allows it to radiate absorb, non-reflected solar energy better than a standard designed roofing. 

There are multiple benefits to having a cool roof installed on your commercial structure: 

  • Reduced energy bills because air conditioning needs are reduced
  • Improved indoor comfort even in non-air conditioned areas
  • Cool roofing and repairs go hand-in-hand because of decreased roof temperature
  • Decreased roof temperature expands lifespan of roof

Not only will your building and your budget benefit from cool roofing, but the environment will benefit from cool roofing too in the following ways: 

  • Urban heat island temps are reduced
  • Peak power demands are reduced, minimizing power outages
  • Power plant emissions are reduced, including carbon dioxide, mercury, nitrous oxide, and sulfur dioxide

What is the coolest roofing material? And Which type of roofing is best?

We bring these two questions together because the answer will encompass both. Commercial structures are generally large buildings that requires a large roof, they are often flat or have a slight slope. With that in mind, roofing material choices are different than those of a residential property, yet there is still a wide range of materials to choose from.  

Which roofing material is going to be the coolest and which is the best is all dependent where the building is located. For instance, in Texas where summers are blazing hot and the temperatures overall are higher year round, you’ll need a different type of roofing material that will be cool.  In Ohio however, temperatures are milder in the summer, but the winters can torture commercial roofing. Between the two different regions, cool roofing is more of an interest in Texas than Ohio, but Ohio can benefit from cool roofing during their summers too. 

 New products have been introduced in the commercial  roofing sector in recent years. They are better at providing a high temperature and weather  resistance, with the temperature resistance being a plus for the environment as well as the structure itself.  We offer the following review of some different commercial roofing materials: 

Single Ply: This category of commercial roofing systems include EPDM, PVC, and TPO, all flexible materials.  These are the most preferred materials because they are crack resistant, peel resistant, and most of all weather resistant. Each of these offer these offer cool roofing benefits and are installed in a single layer, and each have benefits as described here: 

  • EPDM Roofing: EPDM stands for ethylene propylene diene monomer and is a tough chemical compound that is also elastic-like and has a strong resistance to constant UV rays beating on it daily. EPDM rubber roof coating is a popular material because of the low install cost and resilient strength. Recommended for and found on low-slope commercial buildings around the world.
  • PVC Roofing:  There are two layers to PVC roofing material that is reinforced with a layer of scrim in between. The UV resistance is possible by additives in the top ply and the bottom ply is contains plasticizers that make it flexible. This typically commercial roofing material is easy to install because of its flexibility. It is a durable, fire-resistant material that has a long lifespan and is a weldable material that makes it a watertight material – a big plus for a largely commercial structure. 
  • TPO: Common in North America, this material is found on low slope roofs and includes reinforced sheets that are heat-welded at the seams. A highly reflective roofing material, this single-ply membrane is made of ethylene-propylene rubber and polypropylene that are polymerized together. 

If you want truly cool roofing, Green Roofing is where it is at. While a green roof isn’t suitable for every building, it is one of the best options in cool roofing. The natural insulation they provide reduces energy costs while creating an enjoyable space for occupants of the building and nature. They absorb stormwater which eases the strain on the drainage system, they improve the air quality, and they do their part to minimize the urban heat island issue. 

white  roof on commercial building

What color roof is the coolest and What color reflects the most heat?

It is common knowledge that dark colors absorb heat, which stands to say that light colors are cooler.  The solar reflectance of a light-colored roof can lower the need for air conditioning by twenty percent. Again, we’ll compare Ohio to Texas and their unique climates. Ohio has summer weather, but not for as long as Texas and not has hot. Therefore, they would benefit from a light color roof, but not as much as a commercial structure in Texas would. 

With all we’ve discussed here, are you still asking Is a cool roof worth it? Our answer is yes, or ask any roofing consultant or contractor, they will tell you yes, cool roofing is worth the slight increase for installing. You’ll see a ROI during the summer months when the utility bills are lower, but the building is comfortable. You’ll notice the effect when you step outside your building too because the immediate air around will be cooler. 

Not sure how to get cool roofing? Call several roofing contractors in your area that specialize in commercial roofing. Inquire what they offer in cool roofing and then get quotes. Compare at least three different quotes with the materials used, the install time, warranty, etc. Call (740) 505-1467 today for cool roofing in Cincinnati, OH.

What Is the Difference Between TPO and EPDM Roofing?

A Roofer Installs TPO Roofing.

What is the difference between TPO and EPDM roofing?

When it comes to commercial roofing, most flat roofs today will be either TPO or EPDM. While both are single-ply membrane roofing systems, they differ quite a bit. TPO, for instance, is made from a synthetic plastic material while EPDM is synthetic rubber. Most noticeably, however, is their color. TPO roofing tends to be lighter in color, often white or light tan, while EPDM is usually black.

TPO has a distinct advantage for warmer climates because it provides greater protection against UV radiation. It reflects the sun’s heat better than EPDM, cooling your building better in the summer, and putting less strain on HVAC systems. EPDM on the other hand absorbs heat in the summer and puts more strain on your HVAC system. TPO also tends to be more puncture resistant than EPDM, which makes it more effective against leaks, although EPDM often holds up better against hail, and is valued in areas where hail is a problem. While TPO is puncture-resistant, hailstones often leave behind concentric circles in the material that can weaken it over time. 

What type of roofing system is best for your building? That depends largely on what you value most. Energy savings often win out when it comes to installing TPO and if you need reliable TPO roof repair and installation in Cincinnati, OH, you can always count on the team at Paramount Commercial Roofing Systems. As a full-service commercial roofer, we also install and repair EPDM roofing. Get more information about these roofing systems or an estimate on services by calling (740) 505-1467.

Is TPO roofing good?

TPO roofing has become a popular choice in commercial roofing over the past decade or so. It’s especially sought after because of its energy efficiency, in particular when it comes to lower cooling costs. If you are thinking about installing TPO, here are some of its pros and cons.


  • It’s easier to install and costs less than other single-ply roofing membranes like EPDM.
  • Resists dirt build-up, algae, and mildew growth, and is highly tear- and puncture-resistant.
  • It’s very flexible and expands and contracts well as temperatures fluctuate.
  • As mentioned, it reflects the sun well and is highly energy efficient.


  • Quality and thickness will vary, depending on the manufacturer. With TPO, thickness doesn’t play a role in its durability.
  • Laminate that is used on top of material sometimes cracks easily, creating weaknesses in the material.
  • When installed, several seams are created, which can weaken when expansion and contraction occurs.

How long does TPO roof last?

TPO is very durable, especially as newer longer-lasting materials are created. While some earlier versions of TPO lasted only about 10 to 15 years, newer versions last anywhere from 20 to 30 years if properly installed.

Can you walk on a TPO roof?

You can walk on TPO roofs without puncturing them, but you have to tread carefully on them. Also, when you’re performing routine maintenance on them you have to be careful with tools. You especially need to avoid dropping heavy tools on the material to keep from puncturing it. Of course, this could be said of most single-ply membranes. Any hard impact on any type of roof can cause damage.

Is TPO roofing fire resistant?

TPO roofing has to have fire retardant chemicals to add to it for it to be considered fire-resistant. This is normally performed by most manufacturers during the manufacturing process. When fire retardant is added to TPO it acquires a Class A fire-resistance rating from the Underwriters Laboratories, which is the top rating for fire resistance. It means the roofs are highly effective even in the most severe fires.

Is TPO waterproof?

No matter what materials are used, flat roofs always have problems with poor drainage. This problem with poor drainage leads to leaks and other water damage issues. One advantage TPO has over other flat roofing solutions is that it is waterproof. When TPO roofing is installed the seams are heat welded together making them less susceptible to water penetration. The material itself also sheds water better than other roofing materials.

What colors does TPO roofing come in?

TPO roofing is typically going to be lighter than other roofing materials. Common colors include white, tan, or gray. These colors are preferable and allow the material to reflect the sun better, thus cooling your building better.

Can you paint a TPO roof?

While TPO is typically white or a lighter color like tan or gray, some people might want to paint the roof to better fit in with the building’s overall aesthetic. Before TPO roofing is painted, you often need to clean and then treat the surface with a primer, though there are some paints on the market that will directly adhere to the surface of the roof.

TPO Installed on a Roof.

Can TPO roofing be repaired?

Several methods can be used to repair TPO. When your TPO roofing in Cincinnati, OH needs repairing, look to the professionals at Paramount Commercial Roofing Systems. We offer a full range of repair and installation options for all varieties of commercial roofs. Find out more about us or get an estimate by calling (740) 505-1467.